|
Introduce
UV
Lasers
266nm
Deep UV Lasers
355nm
UV Lasers
355nm CW Lasers (1-10mW)
355nm Pulsed Lasers (1-80mW)
355nm Pulsed Lasers (100-500mW)
355nm Pulsed Lasers (600-1000mW)
375nm
UV Lasers
Visible
DPSS Lasers
Visible Diode collimated Lasers
Infrared DPSS Lasers
Infrared Diode collimated Lasers
Low
Noise Lasers
Single
Longitude Mode Lasers
Q-switched / Pulsed Lasers
RGB
/ RG Lasers
Fiber Lasers
Laser Pointers
Laser Collimator
Laser
Scanner System
Laser
Accessory
|
| DPSS
355nm Q-switched Pulsed UV Laser |
|
|
|
|
|
| Specifications : |
| Model |
|
SDL-355-XXXQ
|
| Wavelength
(nm) |
|
355nm |
| Ave
Output Power |
|
1-80mW |
|
Operating
mode |
|
Frequency conversion of Q-switched pulsed laser |
|
Peak
power (mW) |
|
~10W |
| Single pulse energy |
~0.1~20¦ÌJ |
| Pulse duration |
~10ns |
| Average power (mW) |
Average power (mW) = Single pulse energy (uJ) * Rep. rate (kHz) |
Rep. rate (kHz) |
|
Controllable |
Specified One rep. rate, such as 1k, 2k, 3k, up to 4kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period). |
| Uncontrollable |
Different rep. rate in the range of 1Hz-4kHz can be obtained by input an external TTL signal. |
Undefined rep. rate among 5k-20kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses. |
|
| Ave power stability after warm-up |
|
<1%,<3%,<5% (over 2/4/8 hours)
|
|
Transverse
mode |
|
|
|
Warm-up time |
|
|
|
Beam parameters |
|
|
|
Dimensions
of laser head (mm) |
|
|
| Beam height from base |
45mm |
| Beam Diameter |
<2mm |
| Polarization
ratio |
|
| Power
supply (110 or 220VAC) |
|
|
Operating
Temperature |
|
|
|
Dimensions
of power supply |
|
|
|
Expected
Operating Lifetime |
|
|
|
Warranty time |
|
|
| Note:
|
 |
See
the
Glossary and Technology
for information about the terms
used |
|
|
In
the front of the laser, we add
an infrared filter. The residual
IR part is less than 10-3. Please
refer to the
technology page for more information
about the filter. |
|
|
Other
Sytles and custom designs are
available. Contact us to discuss
your needs. |
|
|
|
|
|
|
|
